Kia Sedona: SRSCM
- SRS Control Module (SRSCM) Description and Operation
- SRS Control Module (SRSCM) Components and Components Location
- SRS Control Module (SRSCM) Repair procedures
- Front Impact Sensor (FIS) Description and Operation
- Front Impact Sensor (FIS) Components and Components Location
- Front Impact Sensor (FIS) Repair procedures
- Side Impact Sensor (SIS) Description and Operation
- Side Impact Sensor (SIS) Components and Components Location
- Side Impact Sensor (SIS) Repair procedures
- Seat Belt Buckle Switch (BS) Description and Operation
- Seat Belt Buckle Switch (BS) Components and Components Location
- Seat Belt Buckle Switch (BS) Repair procedures
- Passive Occupant Detection System (PODS-F) Description and Operation
- Passive Occupant Detection System (PODS-F) Components and Components Location
- Passive Occupant Detection System (PODS-F) Repair procedures
- Schematic Diagrams
Emergency Fastening Device (EFD) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least 30 seconds before beginning to work.
2.
To remove the locking mechanism (A), using a flatheaded (-)
screwdriver (B), ...
SRS Control Module (SRSCM) Description and Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints
System Control Module) is to determine an event that warrants restraint
system air bag deployment.
The SRSCM must decide w ...
Other Information:
Input Speed Sensor Schematic Diagrams
Circuit Diagram
...
Intake Actuator Description and Operation
Description
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculat ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026