Kia Sedona: Front Impact Sensor (FIS) Components and Components Location - SRSCM - Restraint - Kia Sedona YP Service ManualKia Sedona: Front Impact Sensor (FIS) Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Components and Components Location

Components

Front Impact Sensor (FIS) Description and Operation
Description The Front Impact Sensors (FIS) are installed in the Front End Module (FEM). These remote sensors are used to detect acceleration due to a collision at the mounting location. The pri ...

Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front i ...

Other Information:

Rear fan speed control
From front seat Set the rear climate control selection (REAR ON) button to the ON position and turn the rear fan speed control (REAR) knob in the front climate control panel to the desired posi ...

Radiator Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. (Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") 3. Drain ...

Categories

Copyright © www.kisedona.com 2016-2026