Kia Sedona: Fuel Pressure Regulator Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Regulator Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”)

2.	Disconnect the fuel sender connector (A) and fuel pump connector (B).

3.	Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.

4.	Remove the reservoir cup (B) after releasing the fixing hook (A).

5.	Disconnect the ground line (A).

6.	Remove the fuel pressure regulator after remove the fixing pin (A).

Installation

1.	Install in the reverse order of removal.

Fuel Sender Repair procedures

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Lift the fixing hook (B) by using a common driver, and ...

Filler-Neck Assembly Repair procedures

Removal 1. Open the fuel filler door and then remove the filler-neck mounting bolts (A). Filler-neck assembly mounting bolt: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Left the ...

Other Information:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Schematic Diagrams
Circuit Diagram ...

Rear Door Window Glass Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. Pull down rear door window glass by pressing th ...

Kia Sedona: Fuel Pressure Regulator Repair procedures

Fuel Sender Repair procedures

Filler-Neck Assembly Repair procedures

Other Information:

Categories