Kia Sedona: Passive Occupant Detection System (PODS-F) Description and Operation - SRSCM - Restraint - Kia Sedona YP Service ManualKia Sedona: Passive Occupant Detection System (PODS-F) Description and Operation

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Restraint / SRSCM / Passive Occupant Detection System (PODS-F) Description and Operation

Description
In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passive occupant detection system (PODS-F). If the seat is occupied, PODS-F detects passenger presence status and sends signal to SRSCM via CAN.
SRSCM recognizes two different types of signals: 1 (Empty or small occupant with child restraint system) or 2 (Occupied by large occupant and small occupant).
According to these signals, ACU determines whether or not to deploy the PAB (Passenger Airbag).
Seat Belt Buckle Switch (BS) Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work. 2. Remove the front seat assembly. (Refer to Body - "Front seat") 3. Loosen th ...

Passive Occupant Detection System (PODS-F) Components and Components Location
Components ...

Other Information:

Height Adjust Repair procedures
Replacement 1. Remove the center piller upper trim. (Refer to Interior Trim - "Center Piller Trim") 2. After loosening the mounting bolts, remove the height adjust (A). Tightening torque ...

Auto Defogging Sensor (DATC only) Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal to blow out wind for defogging if moisture occurs. On receiving the signal from ...

Categories

Copyright © www.kisedona.com 2016-2026