Kia Sedona: Cooling System
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Cooling System
- Troubleshooting
- Coolant Repair procedures
- Cooling Fan Components and Components Location
- Cooling Fan Description and Operation
- Cooling Fan Specifications
- Cooling Fan Schematic Diagrams
- Cooling Fan Repair procedures
- Radiator Components and Components Location
- Radiator Repair procedures
- Reservoir Tank Repair procedures
- Water Temperature Control Assembly Components and Components Location
- Water Temperature Control Assembly Repair procedures
- Water pump Components and Components Location
- Water pump Repair procedures
- Water pump Troubleshooting
- Thermostat Components and Components Location
- Thermostat Repair procedures
- Thermostat Troubleshooting
Troubleshooting
Troubleshooting
Trouble SymptomProbable CauseRemedyEngine misfire with abnormal internal lower engine noises.Worn crankshaft bearings.Loose or damaged engine drive plate.Replace the crankshaft an ...
Troubleshooting
Engine Overheat Troubleshooting
Inspection RemedyVisual inspectionInspect for shortage of coolant in reservoir tank .Reinspect after replenishing coolant.Inspect for coolant pollution after remo ...
Other Information:
Knock Sensor (KS) Repair procedures
Removal
[Bank 1]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Remove the intake manifold.
(Refer to Engine Mechanical System - "Intake Manifold")
...
Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil level gauge rod (A) and the oil level gauge (B).
Tightening torque:
18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026