Kia Sedona: Cooling Fan Specifications - Cooling System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Cooling Fan Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Specifications
Item
Specification
Fan type
PULLER
Fan speed control
Resistor
Air flow rate [㎥/h (yd³/h)]
2,650 (3,466) - 8% min.
Fan speed (rpm)
1,980 ± 8%
Current (A)
23.3 + 10% max.

Cooling Fan Description and Operation
Description The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation. [Co ...

Cooling Fan Schematic Diagrams
Circuit Diagram ...

Other Information:

Front Alignment Repair procedures
Front wheel alignment     When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always position the vehicle o ...

Troubleshooting
Failure Diagnosis 1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is prohibited. 3. However, when the ...

Categories


Copyright © www.kisedona.com 2016-2025