Kia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Specifications

Specification
Item
Specification
Control type
N/L (Normal Low)
Control pressure kpa(kgf/cm², psi)
"9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location
Component Location 1. 26 Brake control solenoid valve (26/B_VFS) ...

Other Information:

Rear Temperature Control Actuator Description and Operation
Description The heater unit consists of mode control actuator and temperature control actuator. Located in the heater unit, the temperature control actuator regulates the temperature in the follow ...

Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the front fog lamp assembly (A) after loosening ...

Categories

Copyright © www.kisedona.com 2016-2026