Kia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: 26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location

Third generation YP (2014-2021) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / 26 Brake Control Solenoid Valve(26/B_VFS) Components and Components Location

Component Location

1. 26 Brake control solenoid valve (26/B_VFS)
26 Brake Control Solenoid Valve(26/B_VFS) Specifications
Specification Item SpecificationControl typeN/L (Normal Low)Control pressure kpa(kgf/cm², psi)"9.81 ~ 500.14(0.1 ~ 5.1, 1.42 ~ 72.54)"Current value (mA)50 ~ 850Coil resistance(Ω)5.1 ± 0.3 ...

26 Brake Control Solenoid Valve(26/B_VFS) Description and Operation
Description • 26 Brake control solenoid valve is a Variable Force Solenoid (VFS) type. • When TCM supplies variable current to solenoid valve, hydraulic pressure of 26 brake is ...

Other Information:

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Oil Pressure Switch Repair procedures
Removal and Installation 1. Remove the air duct. (Refer to Intake And Exhaust System - "Air Cleaner") 2. Remove the battery. (Refer to Engine Electrical System - "Battery") 3. Remove th ...

Categories

Copyright © www.kisedona.com 2016-2021