Kia Sedona: Fog Lamps Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Fog Lamps Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Fog Lamps Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
3.
Remove the front fog lamp assembly (A) after loosening the mounting screws.

Installation
1.
Install the front fog lamp assembly.
2.
Install the front bumper cover.
3.
Connect the negative (-) battery terminal.
Rheostat Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower switch (A) after l ...

License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after separating the license lamp mounting hooks. 3. Remove the license lamp bulb (B) after ...

Other Information:

Alternator Schematic Diagrams
Circuit Diagram     • COM signal - When controlling the voltage generated, the ECM sends the target voltage data to the alternator via a PWM signal (High volta ...

Operating conditions
Type B Type C Select RCTA (Rear Cross Traffic Alert) in "User Settings" under "Driving Assist" on the instrument cluster. The system will turn on and standby to activat ...

Categories


Copyright В© www.kisedona.com 2016-2025