Kia Sedona: Indicators And Gauges

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Indicators And Gauges

Repair procedures

Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continu ...

Instrument Cluster Components and Components Location

Components Connector Pin Information No.DescriptionNo.Description1Ground signal321Trip switch1_Input (-) 2Illumination output (-)22-3Rheostat switch (Down)_Input23Trip switch2_Input (-)&nbs ...

Other Information:

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Blind Spot Detection Radar Calibration Description and Operation
Description To correctly sense vehicles on the neighboring lanes using the radar, the direction of the sensor and the direction of the vehicle must be aligned. This is the BSD unit alignment. ...