Kia Sedona: Spark Plug Specifications - Ignition System - Engine Electrical System - Kia Sedona YP Service ManualKia Sedona: Spark Plug Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Electrical System / Ignition System / Spark Plug Specifications

Specification
Item
Specification
Type
SILZKR7B11
Gap
1.0 ~ 1.1 mm
(0.0394 ~ 0.0433 in.)
Insulation resistance (MΩ)
10 or more

Ignition Coil Repair procedures
Removal Ignition coil (Cylinder #1) [Bank 1] 1. Remove the surge tank. (Refer to Engine Mechanical System - "Surge Tank") 2. Disconnect the Ignition coil connector (A). 3. Remove the i ...

Spark Plug Description and Operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture there ...

Other Information:

Heater & A/C Control Unit (DATC) Repair procedures
Self Diagnosis 1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel flickers three times at 0.5 second intervals, the corresponding fault code flickers on t ...

Description and Operation
Description Automatic transaxle control system relies on various measurement data to determine the current control status and determine the necessary compensation values. These values are used ...

Categories

Copyright © www.kisedona.com 2016-2026