Kia Sedona: Personal Lamp Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Personal Lamp Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Personal Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the personal lamp (A) using a flat-tip screwdriver.

3.
Disconnect the personal lamp connector (A).

Installation
1.
Connect the personal lamp connector.
2.
Install the personal lamp.
3.
Connect the negative (-) battery terminal.
Vanity Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the vanity lamp (A) using a flat-tip screwdriver. 3. Disconnect the vanity lamp connector (A). Installation 1. Conne ...

Overhead Console Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp (A) after loosening the screws. 3. Disconnect the connector (A) from the overhead console lamp. ...

Other Information:

Center console storage
To open the center console storage, pull up the lever. Center console sliding tray removal procedure ➀ Pull down the knob to slide the sliding tray. ➁ Check the lever located on t ...

Rear Temperature Control Actuator Description and Operation
Description The heater unit consists of mode control actuator and temperature control actuator. Located in the heater unit, the temperature control actuator regulates the temperature in the follow ...

Categories

Copyright В© www.kisedona.com 2016-2020