Kia Sedona: Vanity Lamp Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Vanity Lamp Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Vanity Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the vanity lamp (A) using a flat-tip screwdriver.

3.
Disconnect the vanity lamp connector (A).

Installation
1.
Connect the vanity lamp connector.
2.
Install the vanity lamp.
3.
Connect the negative (-) battery terminal.
Luggage Room Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the luggage room lamp lens (A) from the luggage room lamp with a flat-tip screwdriver. 3. Remove the luggage room lamp (A ...

Personal Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the personal lamp (A) using a flat-tip screwdriver. 3. Disconnect the personal lamp connector (A). Installation 1. C ...

Other Information:

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Vehicle stability management (VSM)
This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detects changes in coefficient of friction between r ...

Categories

Copyright © www.kisedona.com 2016-2026