Inspection |
1. |
Check all the clamps for tightness and the connections for leakage. |
2. |
Visually check the vapor lines and hoses for cracks, leaks, loose connections, or deformation. |
1. |
Visually check that the fuel tank cap assembly and gasket (A) are not deformed or damaged. |
Dynamic Damper Components and Components Location
Components
1. BJ assembly2. BJ circlip3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band9. TJ boot10. Spider assembly11. Retainer ring12. TJ housing13. Housin ...
Rear Evaporator Core Repair procedures
Replacement
1.
Remove the rear heater & A/C unit.
(Refer to Rear Heater - "Rear Heater Unit")
2.
Remove the rear heater & A/C lower case after loosening the screws.
3.
Remove the ...