Kia Sedona: Tail Gate Weatherstrip Repair procedures - Tail Gate - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Tail Gate Weatherstrip Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Weatherstrip Repair procedures

Replacement
1.
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
2.
Remove the tail gate weatherstrip (A).
   
Do not apply sealant to the body.

3.
Install in the reverse order of removal.
   
Install the weatherstrip aligned with center line (B).
Tail Gate Lift Repair procedures
Replacement     Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. ...

Fuel Filler Door
...

Other Information:

Inhibitor Switch Repair procedures
Inspection Power Circuit Inspection 1. Disconnect the Inhibitor switch connector. 2. Ignition KEY "ON"" & Engine "OFF".. 3. Measure voltage between supplied power and ground at inhi ...

Charging System Warning Light
This warning light illuminates : Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When there is a malfunction wit ...

Categories


Copyright В© www.kisedona.com 2016-2024