Kia Sedona: Crankshaft Damper Pulley Components and Components Location - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Crankshaft Damper Pulley Components and Components Location

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Crankshaft Damper Pulley Components and Components Location

Components

1. Crankshaft damper pulley

Drive Belt Tensioner Repair procedures
Removal and Installation 1. Remove the drive belt idler. (Refer to Timing System - "Idler") 2. Remove the drive belt auto tensioner (A). Tightening torque Bolt (B) : 81.4 ~ 85.3 N.m (8. ...

Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the engine room under cover and engine room RH side cover. (Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") 2. Remove the RH side front ...

Other Information:

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Speaker Repair procedures
Inspection 1. Troubleshooting for Speaker (1) Basic inspection of speaker Inspect the sound from speaker after verifying that the speaker mounting screws are removed and the wiring connector ...

Categories

Copyright В© www.kisedona.com 2016-2025