Kia Sedona: Fuel Pressure Regulator Repair procedures
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Regulator Repair procedures
| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
| 2. |
Disconnect the fuel sender connector (A) and fuel pump connector (B).
|
| 3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.
|
| 4. |
Remove the reservoir cup (B) after releasing the fixing hook (A).
|
| 5. |
Disconnect the ground line (A).
|
| 6. |
Remove the fuel pressure regulator after remove the fixing pin (A).
|
| Installation |
| 1. |
Install in the reverse order of removal. |
Fuel Sender Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).
3.
Lift the fixing hook (B) by using a common driver, and ...
Filler-Neck Assembly Repair procedures
Removal
1.
Open the fuel filler door and then remove the filler-neck mounting bolts (A).
Filler-neck assembly mounting bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
2.
Left the ...
Other Information:
Rail Pressure Sensor (RPS) Description and Operation
Description
Rail Pressure Sensor (RPS), installed on the delivery pipe,
measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in the s ...
Steering Angle Sensor Description and Operation
Description
Installed in MDPS (Motor Driven Power Steering), the Steering
Angle Sensor (SAS) sends signals to HECU through CAN communication
line.
The SAS is used to determine turning directio ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026