Replacement |
1. |
Remove the cap (A), the nuts and the wiper arm (B).
|
2. |
Disconnect the cowl top cover nozzle hose (A). |
3. |
Remove the cowl top side cover (A). |
4. |
Detach the clips, and then remove the cowl top cover (B). |
5. |
Install in the reverse order of removal.
|
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left
on the tire. Replace the tire when ...
Repair procedures
Removal
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
...