Kia Sedona: Removal and reinstallation - Headrest (for rear seat) - Seats - Safety features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Removal and reinstallation

Third generation YP (2014-2021) / Kia Sedona YP Owners Manual / Safety features of your vehicle / Seats / Headrest (for rear seat) / Removal and reinstallation

To remove the headrest :

1. Raise it as far as it can go then press the release button (1) while pulling the headrest up (2).

To reinstall the headrest :

1. Put the headrest poles (3) into the holes while pressing the release button (1).

2. Adjust it to the appropriate height.

After installing the headrest, make sure that it is installed in the right direction.

A headrest installed reversely could increase whiplash injury during rear impact.


The second row headrest is equipped with auto-folding function.The cable may become dislocated or damaged when the headrest is removed, and may lead to auto-folding function failure.

Adjusting the height up and down
2nd row outboard 2nd row center 2nd row for SXL package 3rd row To raise the headrest : 1. Pull it up to the desired position (1). To lower the headrest : 1. Push and hold the release ...

2nd row outboard headrest
The headrest will fold down automatically when the seat is in the walk in potion. Always be sure the headrest has locked into position after you return the seatback. ...

Other Information:

Rear Seat Back Cover Components and Components Location
Component Location [Second Row Seat Assembly] 1. Second Row Seat Back Cover [RH]2. Second Row Center Seat Back Cover3. Second Row Seat Back Cover [LH] 1. Second Row Seat Back Cover ...

Auto Defogging Sensor (DATC only) Repair procedures
Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the auto defogging se ...


Copyright В© 2016-2021