Kia Sedona: To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
If you move the lever down (to SET-) at increased speed, the cruising speed will be set again.
✽ NOTICE
Be careful when accelerating temporarily, because the speed is not regulated automatically at this time even if there is a vehicle in front of you.
To decrease the crusie control set speed
Follow either of these procedures:
Move the lever down (to SET-), and hold it. Your vehicle set speed will
decrease by 10 km/h (5 mph). Release the lever at the speed you want.
Move the lev ...
SCC will be temporarily canceled when
Cancelled manually
The brake pedal is depressed.
Press the CANCEL button.
The SCC turns off temporarily when the indicator on the LCD display turns off.
The CRUISE indicator is illuminated ...
Other Information:
Brake Pedal Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad).
3.
Remov ...
Front Impact Sensor (FIS) Description and Operation
Description
The Front Impact Sensors (FIS) are installed in the Front End
Module (FEM). These remote sensors are used to detect acceleration due
to a collision at the mounting location. The pri ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
