Kia Sedona: SCC will be temporarily canceled when - To increase cruise control set speed - Smart cruise control system (SCC) - Driving your vehicle - Kia Sedona YP Owners ManualKia Sedona: SCC will be temporarily canceled when

Third generation YP (2014-2020) / Kia Sedona YP Owners Manual / Driving your vehicle / Smart cruise control system (SCC) / To increase cruise control set speed / SCC will be temporarily canceled when

Cancelled manually

The SCC turns off temporarily when the indicator on the LCD display turns off.

The CRUISE indicator is illuminated continuously.

Cancelled automatically

Each of these actions will cancel the SCC operation. (the SET indicator, set speed and vehicle to vehicle distance on the LCD display will go off.)

In a condition the SCC is cancelled automatically, the SCC will not resume even though the RES+ or SET- lever is moved.

If the SCC is cancelled by other than the reasons mentioned, have the system checked by an authorized Kia dealer.

If the system is automatically cancelled, the warning chime will sound and a message will appear for a few seconds.

You must adjust the vehicle speed by depressing the accelerator or brake pedal according to the road condition ahead and driving condition.

Always check the road conditions. Do not rely on the warning chime.

To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal. Increased speed will not interfere with cruise control operation or change the set speed. To retu ...

To resume cruise control set speed
If any method other than the CRUISE button was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you move the lever up/down (to R ...

Other Information:

Blind Spot Detection Indicator Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder.     Be careful not to damage the fixing clips (A). 3. ...

AUX jack Repair procedures
Removal Multimedia Jack 1. Disconnect the negative (-) battery terminal. 2. Remove the console upper cover (A). (Refer to Body - "Floor Console Assembly") 3. Disconnect the multimedia ja ...

Categories

Copyright В© www.kisedona.com 2016-2020