Kia Sedona: Suspension Mounting Bolts Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Suspension Mounting Bolts Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Maintenance / Chassis / Suspension Mounting Bolts Repair procedures

Inspection
Visually check for loose mounting bolts.
Suspension Ball Joints Repair procedures
Inspection Visually check to be sure that there are no flaws and cracks that may cause injury. ...

Tire (pressure & tread wear) Repair procedures
Inspection 1. Check the tire pressure. 17(inch) : 241+7kPa (35 + 1.0 psi) 18(inch) : 241+7kPa (35 + 1.0 psi) 19(inch) : 241+7kPa (35 + 1.0 psi) Tire Rotation Checking For Pull And Wander ...

Other Information:

Rail Pressure Sensor (RPS) Description and Operation
Description Rail Pressure Sensor (RPS), installed on the delivery pipe, measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the s ...

Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced (after removing the resistor). Repl ...

Categories

Copyright В© www.kisedona.com 2016-2020