Inspection
Power steering pump and hoses
Visually check for proper installation, chafing, cracks, deterioration and any leakage.
Replace any deteriorated or damaged parts immediately.
Power ste ...
Inspection
Visually check to be sure that there are no flaws and cracks that may cause injury. ...
Other Information:
Muffler Repair procedures
Removal and Installation
Front Muffler
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Disconnect the RH rear oxygen sensor (HO ...
Inhibitor Switch Repair procedures
Inspection
Power Circuit Inspection
1.
Disconnect the Inhibitor switch connector.
2.
Ignition KEY "ON"" & Engine "OFF"..
3.
Measure voltage between supplied power and ground at inhi ...