Kia Sedona: Specifications - Keyless Entry And Burglar Alarm - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Specifications

Specification
Item
Specification
Rated voltage
3V
Operating temperature
-30°C ~ +60°C (-22°F ~ +140°F)
RF Modulation
FSK
LF Modulation
ASK
RF frequency
433.92 MHz
Button number
4 or 6
Function
Door lock
Door unlock
Tailgate unlock
Panic
Power sliding door open / close

Keyless Entry And Burglar Alarm
...

Components and Components Location
Component Location 1. Hood switch2. Burglar horn3. BCM & RF receiver4. Key warning switch5. Front door lock actuator & switch6. Rear door lock actuator & switch7. Tail gate actuator & ...

Other Information:

Front Impact Sensor (FIS) Description and Operation
Description The Front Impact Sensors (FIS) are installed in the Front End Module (FEM). These remote sensors are used to detect acceleration due to a collision at the mounting location. The pri ...

To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function) by doing as follows: 1.Turn the SCC on (the cruise indicator light will be on but the system will not be act ...

Categories

Copyright © www.kisedona.com 2016-2020