Kia Sedona: Components and Components Location - Keyless Entry And Burglar Alarm - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Components and Components Location

Component Location

1. Hood switch
2. Burglar horn
3. BCM & RF receiver
4. Key warning switch
5. Front door lock actuator & switch
6. Rear door lock actuator & switch
7. Tail gate actuator & switch (Power tail gate module)

Specifications
Specification ItemSpecificationRated voltage3VOperating temperature-30°C ~ +60°C (-22°F ~ +140°F)RF ModulationFSKLF ModulationASKRF frequency433.92 MHzButton number4 or 6FunctionDoor lockDoor ...

Description and Operation
Description Burglar Alarm State [B/A State] B/A StateDescriptionDISARM 1) In "DISARM" state, vehicle start inhibition is disabled. So, when door, hood, or tailgate is opened, there is no ala ...

Other Information:

Disc Brakes and Pads Repair procedures
Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front brake disc thickness check 1. Check the brake pads for wear and fad ...

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

Categories

Copyright © www.kisedona.com 2016-2026