Kia Sedona: Rail Pressure Sensor (RPS) Schematic Diagrams

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Rail Pressure Sensor (RPS) Schematic Diagrams

Rail Pressure Sensor (RPS) Description and Operation

Description Rail Pressure Sensor (RPS), installed on the delivery pipe, measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the s ...

Rail Pressure Sensor (RPS) Repair procedures

Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Removal 1. Turn the ignition switch OFF and d ...

Other Information:

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

Crankshaft Position Sensor (CKPS) Specifications
Specification ItemSpecificationCoil Resistance (Ω)500 ~ 620 [20°C(68°F)] ...