Kia Sedona: Crankshaft Position Sensor (CKPS) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Crankshaft Position Sensor (CKPS) Specifications

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Specifications

Specification
Item
Specification
Coil Resistance (Ω)
500 ~ 620 [20°C(68°F)]

Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS (Refer to "Removal"). 4. After immersing the thermistor of the sensor into engine coola ...

Crankshaft Position Sensor (CKPS) Description and Operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engin ...

Other Information:

CVVT Oil Control Valve (OCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specifi ...

Front Seat Belt Pretensioner Repair procedures
Replacement     When installing the belt, be careful not to damage the pretensioner. 1. Remove the center pillar upper trim. (Refer to Interior Trim - "Center Pillar ...

Categories

Copyright © www.kisedona.com 2016-2020