Kia Sedona: Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams

Manifold Absolute Pressure Sensor (MAPS) Description and Operation

Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog si ...

Manifold Absolute Pressure Sensor (MAPS) Repair procedures

Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]20.0 (0 ...

Other Information:

Parking Brake Pedal Assembly Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel") 3. Remove the junction b ...

Starter Relay Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). 4. Check for continuity between ...