Kia Sedona: Starter Description and Operation
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Electrical System / Starting System / Starter Description and Operation
| Description |
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes the starter motor''s solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of
the starter armature when the engine starts, the clutch pinion gear
overruns.
| 1. Solenoid 2. Brush assembly 3. Armature 4. Overrun clutch |
Starter Components and Components Location
Components
1. Front bracket assembly2. Clutch set assembly3. Lever4. Lever packing5. Magnetic switch assembly6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. Yoke assembly11. Brush ...
Starter Schematic Diagrams
Circuit Diagram
...
Other Information:
Anti-lock Brake System (ABS) Warning Light
This warning light illuminates :
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It illuminates for approximately 3 seconds and then goes off.
When there i ...
Seat Belt Buckle Switch (BS) Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least 30 seconds before beginning to work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Loosen th ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright В© www.kisedona.com 2016-2025