Kia Sedona: Crankshaft Damper Pulley Components and Components Location - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Crankshaft Damper Pulley Components and Components Location

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Crankshaft Damper Pulley Components and Components Location

Components

1. Crankshaft damper pulley

Drive Belt Tensioner Repair procedures
Removal and Installation 1. Remove the drive belt idler. (Refer to Timing System - "Idler") 2. Remove the drive belt auto tensioner (A). Tightening torque Bolt (B) : 81.4 ~ 85.3 N.m (8. ...

Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the engine room under cover and engine room RH side cover. (Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") 2. Remove the RH side front ...

Other Information:

Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal 1. Turn the ignition switch OFF and disconnect the battery n ...

Power tailgate non-opening conditions
The power tailgate will not open automatically, but will close under the following conditions. When the ignition switch is in the ON position, 1. Vehicle is moving above 3 km/h (2 mph). 2. The ge ...

Categories

Copyright © www.kisedona.com 2016-2025