Kia Sedona: Cooling Fan Schematic Diagrams

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Schematic Diagrams

Cooling Fan Specifications

Specifications ItemSpecificationFan typePULLERFan speed controlResistorAir flow rate [㎥/h (yd³/h)]2,650 (3,466) - 8% min.Fan speed (rpm)1,980 ± 8%Current (A)23.3 + 10% max. ...

Cooling Fan Repair procedures

Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air duct (A). 3. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 4. Disconnec ...

Other Information:

Components and Components Location
Component Location Index Engine Room 1. Ambient temperature Sensor2. Receiver-drier3. Condenser4. Compressor5. Discharge Hose6. Service Port (Low Pressure)7. Service Port (High Pressure)8. A/C P ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...