Kia Sedona: Installing the tumble seat (for 8 passenger vehicle)
1. Put the front anchor strikers along the front anchors on the floor.
2. Insert two front anchor strikers into the front anchors.

3. Lift the rear portion of the seat cushion then push down firmly to lock the catches into the rear anchors until an audible
Removing the tumble seat (for 8 passenger vehicle)
Stowing the rear seat - 3rd row seatInhibitor Switch Repair procedures
Inspection
Power Circuit Inspection
1.
Disconnect the Inhibitor switch connector.
2.
Ignition KEY "ON"" & Engine "OFF"..
3.
Measure voltage between supplied power and ground at inhi ...
Automatic headlamp dipping
For
more information, refer to the General
recommendations for automatic lighting
systems.
When the lighting control ring is in the "AUTO”
position and the function is activated on the
touch s ...