Kia Optima Manuals

Kia Sedona: Specifications - Brake System - Kia Sedona YP Service ManualKia Sedona: Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Brake System / Specifications

Specifications
Item
Specification
Master cylinder
•
Type
•
I.D. mm(in)
•
Piston stroke mm(in)
•
Fluid level switch
　
Fixed type 
22.22 mm (0.875 in)
45 ± 1 mm (1.77 ± 0.039 in) 
Provided 
Brake booster
•
Type
•
Boosting ratio
　
10.5" Single
9:1
Front brake (Disc)
•
Type
•
Disc O.D
•
Disc thickness
•
Pad thickness
•
Cylinder type
•
Cylinder I.D.

Ventilated disc
320 mm (12.59 in)
28 mm (1.10 in)
11 mm (0.43 in)
single piston
Ø 63.5 mm (2.5 in)
Rear brake (Disc)
•
Type
•
Disc O.D
•
Disc thickness
•
Cylinder type
•
Cylinder I.D

Solid disc
302 mm (11.89 in)
11 mm (0.43 in)
single piston
Ø 43 mm (1.69 in)
Parking brake
•
Type
•
Drum(Disc) I.D
　
DIH (Drum in hat)
Ø 190 mm (7.48 in)7

   
O.D. : Outer Diameter
I.D : Inner Diameter
Specification(ESC)
Part
Item
Standard value
Remark
HECU
System
4 Channel 4 Sensor (Solenoid)
Total control
(ABS, EBD, TCS, ESC)
Type
Motor, valve relay intergrated type
Operating Voltage
10 ~ 15 V
Operating Temperature
-40 ~ 110 °C (-40 ~ 230°F)
Motor power
270W
Active Wheel speed sensor
Supply voltage
DC 4.5 ~ 20 V
　
Output current low
5.9 ~ 8.4 mA
　
Output current high
11.8~ 16.8 mA
　
Output range
1 ~ 2500 Hz
　
Tone wheel
52 teeth
　
Air gap
0.4 ~ 1.5 mm
　

Service Standard
Items
Standard value
Brake pedal Full stroke
117.1 mm (4.61 in)
Stop lamp switch clearance
1.0 ~ 2.0 mm (0.04 ~ 0.08 in)
Brake pedal free play
3 ~ 8 mm (0.12 ~ 0.31 in)
Front brake disc thickness
28 mm (1.10 in)
Front brake disc pad thickness
11 mm (0.43 in)
Rear brake disc thickness
11 mm (0.43 in)
Rear brake disc pad thickness
10 mm (0.39 in)

Tightening Torques
Items
N.m
kgf.m
lb-ft
Hub nut
88.3 ~ 107.9
9.0 ~ 11.0
65.1 ~ 79.6
Master cylinder to brake booster
12.7 ~ 16.7
1.3 ~ 1.7
9.4 ~ 12.3
Brake booster mounting nuts
16.7 ~ 25.5
1.7 ~ 2.6
12.3 ~ 18.8
Air bleeding screw
6.9 ~ 12.7
0.7 ~ 1.3
5.1 ~ 9.4
Brake tube flare nuts
12.7 ~ 16.7
1.3 ~ 1.7
9.4 ~ 12.3
Front caliper guide rod bolts
21.6 ~ 31.4
2.2 ~ 3.2
15.9 ~ 23.1
Rear caliper guide rod bolts
21.6 ~ 31.4
2.2 ~ 3.2
15.9 ~ 23.1
Front caliper assembly to knuckle
78.5 ~ 98.1
8.0 ~ 10.0
57.9 ~ 72.3
Rear caliper assembly to knuckle
63.7 ~ 73.5
6.5 ~ 7.5
47.0 ~ 54.2
Brake hose to caliper
24.5 ~ 29.4
2.5 ~ 3.0
18.1 ~ 21.7
Brake pedal member bracket nuts
8.8 ~ 13.7
0.9 ~ 1.4
6.5 ~ 10.1
Brake pedal shaft nut
24.5 ~ 34.3
2.5 ~ 3.5
18.1 ~ 25.3
Wheel speed sensor mounting bolt
6.9 ~ 10.8
0.7 ~ 1.1
5.1 ~ 7.6
HECU bracket mounting bolt and nut
16.7 ~ 25.5
1.7 ~ 2.6
12.3 ~ 18.8

Lubricants
Items
Recommended
Quantity
Brake fluid
DOT 3 or DOT 4
As required
Brake pedal bushing and bolt
Chassis grease
As required
Parking brake shoe and backing plate contacting surface
Heat resistance grease
As required
Front Caliper guide rod and boot
AI-11P
0.6 ~ 1.1g
Rear Caliper guide rod and boot
AI-11P
0.5 ~ 1.0g

Brake System
...

Special Service Tools
Special Service Tools Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston. ...

Other Information:

Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. AcceleratorPositionOut ...

Light bulbs
WARNING - Working on the lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the LOCK position and turn off the lights to avoid ...

Categories

Copyright © www.kisedona.com 2016-2026