Kia Sedona: Removing the tumble seat (for 8 passenger vehicle)
1. Insert the seat belt in the belt assembly cover.
2. Insert the seat belt buckle in the seat cushion pocket.
3. Lower the headrest to the lowest position.
4. Slide the seat to the farthest rearward.
5. Fold the seat back by pull up the recline strap.
6. Pull the removal strap and lift the rear portion of the seat cushion.
7. Pull up the catch release lever under the front of the seat cushion while reclining the folded seat rearward slightly to release the front catches from the anchors.
8. Remove the entire seat from the floor.
Folding the rear seat
The rear seatbacks can be folded to facilitate carrying long items or to increase
the luggage capacity of the vehicle.
WARNING - Folded down seatback
Never allow passengers sit on top of the f ...
Installing the tumble seat (for 8 passenger vehicle)
1. Put the front anchor strikers along the front anchors on the floor.
2. Insert two front anchor strikers into the front anchors.
3. Lift the rear portion of the seat cushion then push down fir ...
Other Information:
Programming
Your vehicle may require the ignition switch to be turned to the ACC position
for programming and/or operation of HomeLink. It is also recommended that a new
battery be replaced in the hand-held t ...
Rear Door Side Weatherstrip Repair procedures
Replacement
1.
Remove the clips (C) and remove the rear door side weatherstrip (A).
Butyl tape (B) and mounting clips (C) securely seated.
2.
Install in the rev ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
