Kia Sedona: Folding the rear seat - Rear seat adjustment - Seats - Safety features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Folding the rear seat

Third generation YP (2014-2021) / Kia Sedona YP Owners Manual / Safety features of your vehicle / Seats / Rear seat adjustment / Folding the rear seat

The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle.

WARNING - Folded down seatback

Never allow passengers sit on top of the folded down seatback while the vehicle is moving.This is not a proper seating position and no seat belts are available for use.

This could result in serious injury or death in case of an accident or sudden stop.

WARNING - Objects

Objects carried on the folded down seatback should not extend higher than the top of the front seatbacks.This could allow cargo to slide forward and cause injury or damage during sudden stops.

2nd row center seat (for 8 passenger vehicle)

To fold down the rear seatback

1. Insert the rear seat belt buckle in the pocket between the rear seatback and cushion, and insert the rear seat belt webbing in the guide to prevent the seat belt from being damaged.

2. Set the front seatback to the upright position and if necessary, slide the front seat forward.

3. Lower the rear headrests to the lowest position.

2nd row seat

2nd row center seat (for 8 passenger vehicle)

4. Pull on the seatback folding lever or strap, then fold the seat toward the front of the vehicle. When you return the seatback to its upright position, always be sure it has locked into position by pushing on the top of the seatback.

5. To use the rear seat, lift and pull the seatback backward by pulling on the folding lever or strap. Pull the seatback firmly until it clicks into place. Make sure the seatback is locked in place.

6. Return the rear seat belt to the proper position.

Leg support (2nd row seat for SXL package)
To use the leg support : 1. Pull the leg support lever up and hold it. 2. Adjust the angle and length of the leg support while holding the leg support. When using the leg rest, move the seat to ...

Removing the tumble seat (for 8 passenger vehicle)
1. Insert the seat belt in the belt assembly cover. 2. Insert the seat belt buckle in the seat cushion pocket. 3. Lower the headrest to the lowest position. 4. Slide the seat to the farthest ...

Other Information:

Driving your vehicle
Be sure the exhaust system does not leak. The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the ex ...

Components and Components Location
Component Location 1. Battery2. AC inverter switch3. AC inverter unit4. AC inverter outlet ...


Copyright В© 2016-2021