Kia Sedona: Check fuse BRAKE SWITCH (for smart key system)
Third generation YP (2014-2026) / Kia Sedona YP Owners Manual / Features of your vehicle / LCD display / Warning Messages (for Type B and C cluaster) / Check fuse BRAKE SWITCH (for smart key system)
- This warning message illuminates if the brake switch fuse is disconnected.
- It means that you should replace the fuse with a new one. If that is not possible, you can start the engine by pressing the Engine Start/Stop Button for 10 seconds in the ACC position.
Press start button with key (for smart key system)
This warning message illuminates if you press the Engine Start/Stop Button
while the warning message ...
Other Information:
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Warning type
If the vehicle detected by sensors approaches your vehicle, the warning
chime will sound and the warning light will blink on the outside rearview mirror.
If the detected vehicle is out of th ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026