Kia Sedona: Rear Blower Motor Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Rear Heater / Rear Blower Motor Repair procedures

Inspection

1.	Connect the battery voltage and check the blower motor rotation.

2.	If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.

3.	Replace the blower motor if it is proved that there is a problem with it.

Replacement

1.	Disconnect the battery negative terminal.

2.	Remove the luggage side trim [RH]. (Refer to Body - "Luggage Side Trim")

3.	Remove the rear heater duct (A) after loosening the bolts.

4.	Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws.

5.	Install in the reverse order of removal.

Rear Evaporator Core Repair procedures

Replacement 1. Remove the rear heater & A/C unit. (Refer to Rear Heater - "Rear Heater Unit") 2. Remove the rear heater & A/C lower case after loosening the screws. 3. Remove the ...

Rear Temperature Control Actuator Description and Operation

Description The heater unit consists of mode control actuator and temperature control actuator. Located in the heater unit, the temperature control actuator regulates the temperature in the follow ...

Other Information:

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Exhaust Manifold Components and Components Location
Components 1. LH Exhaust manifold gasket2. LH Exhaust manifold3. LH Heat protector4. LH Exhaust manifold stay5. RH Exhaust manifold gasket6. RH Exhaust manifold7. RH Heat protector8. RH Exhaust m ...

Kia Sedona: Rear Blower Motor Repair procedures

Rear Evaporator Core Repair procedures

Rear Temperature Control Actuator Description and Operation

Other Information:

Categories