Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly") |
3. |
Remove the front seat outer shield cover.
(Refer to Body - "Front Seat Outer Shield Cover") |
4. |
Separate the front seat track (B) after loosening the bolts (A). |
5. |
Disconnect the ventilation seat back duct (A) and ventilation seat cushion duct (B) after pushing the clips. |
6. |
Disconnect the connector (A) and then remove the blower fan (B) after loosening the screws. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front seat assembly [RH].
(Refer to Body - "Front Seat Assembly") |
3. |
Loosen the ventilation seat unit mounting screws (A). |
4. |
Remove the ventilation seat unit (B) after disconnecting the connectors (A). |
Installation |
1. |
Disconnect the connector after installing the blower fan. |
2. |
Install the ventilation seat back duct and ventilation seat cushion duct. |
3. |
Install the front seat track. |
4. |
Install the front seat outer shield cover. |
5. |
Install the front seat assembly. |
6. |
Connect the negative (-) battery terminal. |
1. |
Connect the ventilation seat unit connector. |
2. |
Install the ventilation seat. |
3. |
Install the front seat assembly [RH]. |
4. |
Connect the negative (-) battery terminal. |
Cruise SET Indicator Light
This indicator light illuminates :
...
Trailing Arm Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...