The ventilated seat system generates cool wind by the Push
method in the blower mounted under the seat which then travels through
ducts to the seat back and cushion.
•
Be careful not to spill drink or water on the seat equipped with ventilation system.
•
As the blower draws in only small amount of air, it is hard to feel the air strength by touching it.
Removal
[Ventilation Blower]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
Remove the front seat outer s ...
Other Information:
Components and Components Location
Components Location
[Fuel Tank]
1. Fuel Tank2. Fuel Pump3. Fuel Filter4. Fuel Pressure Regulator5. Canister6. Fuel Tank Air Filter7. Fuel Tank Pressure Sensor (FTPS)8. Canister Close Val ...
Ambient Temperature Sensor Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper Cover")
3.
Disconnect ambient temperature sensor.
4.
Check the resistance of the ...