Kia Sedona: License Lamps Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: License Lamps Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / License Lamps Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp assembly (A) after separating the license lamp mounting hooks.

3.
Remove the license lamp bulb (B) after removing the license lamp socket (A).

Installation
1.
Install the license lamp bulb.
2.
Install the license lamp assembly.
3.
Connect the negative (-) battery terminal.
Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the front fog lamp assembly (A) after loosening ...

High Mounted stop lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer to Body - "Rear Spoiler") 3. Remove the high mounted stop lamp assembly (A) after loosening nut ...

Other Information:

Room lamp
Type A Type B Press the button(1) or lens(1) to turn the light on or off. If the front map lamp turns on by the front map lamp switch, the room lamp will turn on. ...

48,000 km (30,000 miles) or 24 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect vacuum hose ❑ Inspect air conditioning refrigerant ❑ Inspect brake hoses and lines ❑ Inspect drive sh ...

Categories

Copyright © www.kisedona.com 2016-2026