Kia Sedona: High Mounted stop lamp Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: High Mounted stop lamp Repair procedures

Third generation YP (2014-2021) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler.
(Refer to Body - "Rear Spoiler")
3.
Remove the high mounted stop lamp assembly (A) after loosening nuts.

Installation
1.
Install the high mounted stop lamp.
2.
Install the rear spoiler.
3.
Connect the negative (-) battery terminal.
License Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp assembly (A) after separating the license lamp mounting hooks. 3. Remove the license lamp bulb (B) after ...

Rear combination lamp Repair procedures
Removal Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the rear combination lamp cover (A). 3. Remove the rear ...

Other Information:

Rear Temperature Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the temperature control actuator connector. 3. Verify that the actuator operates to the recirculation position when 12V is connect ...

Troubleshooting
Troubleshooting Trouble SymptomProbable causeRemedyVehicle pulls to one sideScoring of driveshaft ball jointReplaceWear, rattle or scoring of wheel bearingReplaceDefective front suspension and st ...

Categories

Copyright В© www.kisedona.com 2016-2021