Kia Sedona: Blind Spot Detection Indicator Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Blind Spot Detection System / Blind Spot Detection Indicator Components and Components Location

Blind Spot Detection Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower switch (A) after loos ...

Blind Spot Detection Indicator Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder.     Be careful not to damage the fixing clips (A). 3. ...

Other Information:

Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.     • If a DTC is present, perform troubleshooting in accordanc ...

Storing the spare tire
1. Assemble the cover and spare tire with valve center aligning together. 2. Lay the tire on the ground with the valve stem facing down. 2. Place the wheel under the vehicle and install the reta ...