Kia Sedona: Height Adjust Repair procedures - Front Seat Belt - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Height Adjust Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat Belt / Height Adjust Repair procedures

Replacement
1.
Remove the center piller upper trim.
(Refer to Interior Trim - "Center Piller Trim")
2.
After loosening the mounting bolts, remove the height adjust (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Height Adjust Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle Components and Components Location
Component Location 1. Front seat belt buckle ...

Other Information:

Smart Cruise Control Unit Description and Operation
Description The smart cruise control unit is installed on the front right-hand side of the chassis. A radar sensor is embedded in the front section of the unit. This sensor detects vehicles and ...

Relay Box (Engine Compartment) Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay block. Power Relay (Type A) Check for continuity between the terminals. ...

Categories

Copyright © www.kisedona.com 2016-2026