Kia Sedona: Purge Control Solenoid Valve (PCSV) Description and Operation - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Purge Control Solenoid Valve (PCSV) Description and Operation

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV) Description and Operation

Description
Purge Control Solenoid Valve (PCSV), installed on the surge tank, controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Purge Control Solenoid Valve (PCSV) Specifications
Specification ItemSpecificationCoil Resistance (Ω)22.0 ~ 26.0 [20°C(68°F)] ...

Purge Control Solenoid Valve (PCSV) Schematic Diagrams
Circuit Diagram ...

Other Information:

Intake Manifold Repair procedures
Removal and Installation 1. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 2. Remove the engine room under cover. (Refer to Engine and Transaxle Assembly ...

Brake Line Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.   &nb ...

Categories

Copyright © www.kisedona.com 2016-2020