Kia Optima Manuals

Kia Sedona: Crash Pad Center Panel Repair procedures - Crash Pad - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Crash Pad Center Panel Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Center Panel Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Remove the center fascia panel.
(Refer to Crash Pad - "Center Fascia Panel")
3.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
4.
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing")
5.
After loosening the mounting screws, remove the crash pad center lower panel (A).

6.
Install in the reverse order of removal.
   
•
Make sure that the connectors are connected properly.
•
Replace any damaged clips.
Crash Pad Center Panel Components and Components Location
Component Location 1. Crash pad center lower panel ...

Main Crash Pad Assembly Components and Components Location
Component Location 1. Main crash pad assembly ...

Other Information:

Power Sliding Door (PSD) Drive Unit Repair procedures
Removal     • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tap ...

Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is armed. A front or rear door is opened without using the ignition key or transmitter (or smart key). The tailga ...

Categories

Copyright © www.kisedona.com 2016-2026