Kia Sedona: Crash Pad Side Cover Repair procedures - Crash Pad - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Crash Pad Side Cover Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
[LH]
1.
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
[RH]
1.
Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Crash Pad Side Cover Components and Components Location
Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Crash Pad Center Panel Components and Components Location
Component Location 1. Crash pad center lower panel ...

Other Information:

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]20.0 (0 ...

Starting the engine
WARNING - Proper footwear Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake and acceler ...

Categories

Copyright © www.kisedona.com 2016-2026