Kia Sedona: Rear Door Belt Inside Weatherstrip Repair procedures - Rear Door - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Door Belt Inside Weatherstrip Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Inside Weatherstrip Repair procedures

Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Door Belt Outside Weatherstrip Repair procedures
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, remove the rear door belt outside weatherstrip (A). 3. In ...

Rear Door Side Weatherstrip Repair procedures
Replacement 1. Remove the clips (C) and remove the rear door side weatherstrip (A).     Butyl tape (B) and mounting clips (C) securely seated. 2. Install in the rev ...

Other Information:

Forward and backward (2nd row seat)
for SXL package To move the seat forward or backward : 1. Pull the seat slide adjustment lever up and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make sure ...

Jack label
Type A Type B Type C 1. Model Name 2. Maximum allowable load 3. When using the jack, set your parking brake. 4. When using the jack, stop the engine. 5. Do not get under a vehicle that is ...

Categories

Copyright © www.kisedona.com 2016-2026