Kia Sedona: Shift Cable Components and Components Location - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Shift Cable Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Components and Components Location

Components

1. Shift lever assembly
2. Shift cable assembly


3. Shift cable retainer







Shift Lever Repair procedures
Removal 1. Move the shift lever to "N" range. 2. Disconnect the battery negative (-) cable. 3. Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separ ...

Shift Cable Repair procedures
Removal 1. Move the shift lever to "N" range. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner) 3. Remove the battery and battery tray. (Refer to Eng ...

Other Information:

Rear Assist Arm Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Electronic Stability Control (ESC) OFF Indicator Light
This indicator light illuminates : Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When you d ...

Categories

Copyright © www.kisedona.com 2016-2026