Kia Sedona: Repair procedures - Crankcase Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Crankcase Emission Control System / Repair procedures

Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Inspect the PCV valve operation.
(1)
Run the engine at idle.
(2)
Touch the open end of the PCV valve on a fingertip.
(3)
Make sure that intake manifold vaccum can be felt.
   
The plunger inside the PCV valve will move back and forth at vacuum.

4.
If the vacuum is not felt, clean or replace the vapor hose.
Schematic Diagrams
Schematic Diagram ...

Positive Crankcase Ventilation (PCV) Valve Description and Operation
Operation Principle ...

Other Information:

Rear Shock Absorber Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to damage ...

Fog Lamps Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 3. Remove the front fog lamp assembly (A) after loosening ...

Categories


Copyright В© www.kisedona.com 2016-2024