Kia Sedona: Output Speed Sensor Description and Operation
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Description and Operation
| Description |
| • |
Output speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation. |
| • |
Output speed sensor (A) and input speed sensor are integrated and are installed in the transaxle.
|
Functions
| • |
Measures the rate of rotation of the output shaft inside the transaxle and delivers the readings to the TCM. |
| • |
The sensor provides critical input data that''s used in
feedback control, torque converter clutch control, gear setting control,
line pressure control, clutch activation pressure control, and sensor
fault analysis. |
Output Speed Sensor Components and Components Location
Component Location
1. Output speed sensor2. Input speed sensor
...
Output Speed Sensor Schematic Diagrams
Circuit Diagram
...
Other Information:
Brake Pedal Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad).
3.
Remov ...
Rear Axle Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damag ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026